Quick Login

Author Topic: I built a rig from garbage...  (Read 3961 times)

Offline ve3lyx

  • Commodore
  • *
  • Posts: 159
  • Country: ca
I built a rig from garbage...
« on: December 11, 2013, 01:50:20 UTC »
I built a rig from garbage and junk as a POW would. It receives well and will also transmit when voltage is raised above 90 volts. Soup can lids made the variable cap, A pencil and some scrap wire made the RFC. A friend found a 1/2 set of Brandes phones buried in the mud at the local dump. The gridleak was made with a pencil on wood and the gridleak cap from disposable pie plates and writing paper. Thumbtacks made all connections and it is disquised as a birdhouse. I used a discarded 56tube based on the deduction that the vast majority of tubes discarded are probably ok. I made the socket from a section of  tree branch. You can see it and hear its first ever "come to life" moment on YOUTUBE under POW RADIO BUILD or something like that. I named it but didn't write it down.  It was probably the most interesting build ever. So it would of course be my stranded  QRP RIG SINCE I would have built it  after arrival. It was pretty exciting when it actually worked. I will post a decent picture of it tomorrow. It is too dark tonite but it is sitting about 5 feet away right now. It is basically just a simple Hartley oscillator
Don
As promised. BTW to keep it real it was operated on dump "dead" batteries as well

Offline W1SFR

  • Leading Rate
  • *
  • Posts: 9
  • Country: us
Re: I built a rig from garbage...
« Reply #1 on: December 11, 2013, 20:37:11 UTC »
Wow…that's so impressive! If I ever get ship wrecked, I'm calling you!

Steve
W1SFR

Offline ve3lyx

  • Commodore
  • *
  • Posts: 159
  • Country: ca
Re: I built a rig from garbage...
« Reply #2 on: December 11, 2013, 22:12:17 UTC »
Thanks. It was a most interesting project. Here is one of the videos
POW RADIO The Build