Quick Login

Author Topic: What are the rigs being used for QRP?  (Read 30890 times)

Offline ve3lyx

  • Commodore
  • *
  • Posts: 159
  • Country: ca
What are the rigs being used for QRP?
« on: December 31, 2013, 02:43:39 UTC »
I am curious what the rigs are, commercial, homebrew, kits or vintage.
I'll start with mine. I use a 3 transistor homebuilt I got from some of Lew McCoy's articles about 30 years ago. I upgraded it to a NTE128  final . Today I added absorbtion loop modulation which gives me AM phone if I like with no active components. I also have and use three vintage homebuilt rigs with tubes. One is a TNT, One a MOPA and one a 4 tube transceiver, all under 5 watts. The mopa is also a transceiver. All have AM capability as well a CW.
What is on your shelf?
Don Ve3LYX

Offline UA9OTW

  • Petty Officer
  • *
  • Posts: 12
  • Country: ru
  • PhotoHam
    • Valery Titievsky Photography
Re: What are the rigs being used for QRP?
« Reply #1 on: January 03, 2014, 14:28:12 UTC »
I use FT-817ND with a 500 Hz CW filter + Youkits HB-1B MK2 + Elecraft T1+ END FEDZ EF 20, EF10/20/40 + LW.

In shack Icom IC-7200 + LDG IT-100 + CITY WINDOW (CW40100) + G5RV/ZS6BKW from W8AMZ.


Power 1-5 watt


72! 73! Valery UA9OTW/QRP
Valery, UA9OTW/QRP
QRP ARCI #15169
RU-QRP #353
http://www.flickr.com/photos/dotfoto/

Offline NS7E

  • Able Seaman
  • *
  • Posts: 1
  • Country: us
Re: What are the rigs being used for QRP?
« Reply #2 on: January 03, 2014, 19:21:48 UTC »
I run ATS-3B 6 band digital transceiver 5 w  fits in an altoids tin 5 Oz  than I have the H1-B1 from youkits  4 bander 5w  the best receiver I have heard .
also my ic-756 pro2 goes down to 1 watt  QRP is the most fun you can have with your close on. HI HI

Offline N9EGT

  • Able Seaman
  • *
  • Posts: 1
  • Country: us
Re: What are the rigs being used for QRP?
« Reply #3 on: January 06, 2014, 17:12:32 UTC »
I am using a newly acquired  HB-1B with a 250 foot loop wire antenna. So far it has worked great. I am working on my CW proficiency and speed.

73's

Wayne  N9EGT

Offline SM2IUF

  • Able Seaman
  • *
  • Posts: 1
  • Country: se
Re: What are the rigs being used for QRP?
« Reply #4 on: January 06, 2014, 18:57:18 UTC »
I have a few QRP rigs but the best is my KX3 with a small ackumulator and solarpanels with regulator. For antenna I am using the old original VS1AA antenna (Windom like) since the ATU are capable of matching it on all the bands the antenna is capable of. I use two radials for each band and have had great fun with it.

I have both a full size VS1AA and a half size for different needs and both works very nice with the ATU. The antennas is light weight since I don't need any coaxial cable so it's great for backpacking.

I am mostly operating CW but KX3 really shines on SSB if the TX audio equalizer it set correct by enhancing high tones and suppressing low tones. I have very aggressive settings for the EQ and with the excellent compressor I get real good signal reports from overseas.

Offline YV5IUA

  • Able Seaman
  • *
  • Posts: 1
  • Country: ve
Re: What are the rigs being used for QRP?
« Reply #5 on: January 06, 2014, 18:58:43 UTC »
this is my QRP station, FT 817ND, mini paddle CW (YV5EN), battery 12 V- 7A/h, antenna Buddipole And AA-52 analyzer antenna.  Best Regards from Caracas, Venezuela YV5IUA John


Enviado desde mi iPhone con Tapatalk

Offline ON6ZK

  • Leading Rate
  • *
  • Posts: 8
  • Country: be
Re: What are the rigs being used for QRP?
« Reply #6 on: January 08, 2014, 18:48:49 UTC »
I use a Kenwood TS120V  Max 10 watt out PEP CW - SSB
Also have a K1 Elecraft MAx out 7 watts PEP CW
MFJ Cub tranceiver on 14 Mhz CW 0,8 watts out CW

Antenna's : 1/4 verticals on 30 / 40 / 8O meters
                   4 element yagi on  12 / 15 / 17 / 20 meters   all monoband yagi's
                   8 element monoband yagi on 10 meters
                   Windom antenna for 10 to 80 meters
                   modified CB vertical for 10 meters & 12 meters : Antron 99

99 % CW operator !
QRP is great ! Sked are welcome on 14060 Mhz CW or other proposal .

Offline ve3lyx

  • Commodore
  • *
  • Posts: 159
  • Country: ca
Re: What are the rigs being used for QRP?
« Reply #7 on: January 08, 2014, 22:20:51 UTC »
YV5IUA
That is a real neat mini paddle!
Don

Offline SM5JAB

  • Leading Rate
  • *
  • Posts: 6
  • Country: se
Re: What are the rigs being used for QRP?
« Reply #8 on: January 15, 2014, 13:27:09 UTC »
The KX-1 is a portable favourite. It contains the battery and has a cute paddle attached. For antenna a 6 m fishing rod is enough.


Offline IZ5ZCO

  • Admiral
  • *
  • Posts: 406
  • Country: it
  • The world is too small for QRO.
    • QRP Club
Re: What are the rigs being used for QRP?
« Reply #9 on: January 15, 2014, 14:11:48 UTC »
YV5IUA
That is a real neat mini paddle!
Don


<a href="http://youtu.be/S5fafqrLwN4" target="_blank" class="aeva_link bbc_link new_win">http://youtu.be/S5fafqrLwN4</a>
72 de Nicola

Offline G0BVZ

  • Commodore
  • *
  • Posts: 180
  • Country: england
  • Feet in England heart in Ireland. Éirinn go Brách!
Re: What are the rigs being used for QRP?
« Reply #10 on: January 15, 2014, 15:03:29 UTC »
Shack - FT450D  ( I know it can QRO but is always set at 5W. Good for CW with good (IMHO) digital signal processing, plays nicely with Ham Radio Deluxe v5 (The last free version) . The rig control via HRD is fast and convenient, saves wear & tear on the rig controls!! ;D I don't use the fairly limited range  internal ATU much, prefer to use external matchbox. Internal keyer is fine but not used because I'm determined to get my straight key work up to standard first.

Portable - FT817ND with 300Hz cw filter, which is a revelation. It transforms the rig and it really helps protect my ears from excessive white noise/ general racket.  (I'm fairly deaf and very interested in preserving what remaining hearing I have.) Can wind the power right down.

Guerilla QRP - Youkits HB-1B 4 bander. An amazing little rig for the money. Variable filtration is effective. Only way to control output power I've found so far is to reduce power supply voltage a little.  Unfortunately this also reduces audio gain.  I switched to a pair of Sennheiser HD219 headphones and their sensitivity compensates nicely for this. If it is a really noisy environment, I switch my hearing aids to 'Loop' and they couple electronically to my phones and background noise is pushed a lot further into the background!!

Various heaps of home brew crud, none of which approaches the rigs above. Also becoming much too quiet!!

I regret parting with
Shimizu Denshi SS-105S max 10w of joy, all analogue dials and reliable to nth degree
TS130V  Why did I sell this rig?  Great receiver, qrp,narrow  crystal filter... regret, regret...   :-[

That's all folks.

Vic

Offline KB3WEY

  • Able Seaman
  • *
  • Posts: 1
  • Country: us
    • QRZ
Re: What are the rigs being used for QRP?
« Reply #11 on: January 16, 2014, 22:13:00 UTC »
I use a IC-7000 dialed down to 5 or 3 percent (5 or 3 watts) but I am wondering if there is any RF output on the 0% setting like maybe 1/2 a watt. beside that I am working on a 38'special.
 

PG4I

  • Guest
Re: What are the rigs being used for QRP?
« Reply #12 on: January 17, 2014, 08:22:47 UTC »
I am trying to use all homebrew equipment, although some of them may be kits or derived from kits. So far I build a BITX20 and rockmite20 (designed the PCB myself). I am trying to go even smaller, now working on a PIXIE for 20 meters.

The keyer, SWR meter and antenna tuner are also homemade. Homebrew combined with QRP makes maximum fun! Here is a picture of my rockmite...

Offline NY4G

  • Able Seaman
  • *
  • Posts: 4
  • Country: us
Re: What are the rigs being used for QRP?
« Reply #13 on: January 17, 2014, 19:20:40 UTC »
Both my rigs are QRP capable down to 100 milliwatts - K2 and KX3.  I had a KX1 and an FT817.  My first ever long distance contact at over 2000 miles per watt is with the FT817 to Australia on phone.  The heavy lifting was done at the other end by VK6LC on his 20m beam.  My most recent is to Guam on the KX3 with an inverted L cut for 80m with 500 feet of radials and my most miles per watt is to Indiana at 100 milliwatts for 5370 miles per watt on a ZS6BKW antenna. 

73 de NY4G
Ariel

VE2TH

  • Guest
Re: What are the rigs being used for QRP?
« Reply #14 on: January 17, 2014, 21:25:01 UTC »
Hello all,

Here I use the FT-817ND, ICOM IC-703+ FOR 10 & 6 METERS AND THE KX3.

My ever long distance contact was on 30 meter with VK3IO who is using only extended double zepp at 100 ft = 30 meter high between 2 GUM Trees.

Which gives me 3371 KM/WATT. Here I use only simple wire antennas and monoband vertical, hooked up to my chain link fence, which is 183 ft long around my lot or 55 meters long.

You never know who you can work running QRP, that is the biggest fun of QRP power.

See you on the air Ariel,

72 Michel VE2TH QRP & QRPp